Marble is the material of choice in many of the finest villas, hotel lobbies and showrooms on the Costa del Sol, and for good reason. Few surfaces reflect light so beautifully or lend a space such a sense of quality. Yet marble is also one of the most delicate flooring materials in everyday use. Within a few years, high-traffic areas lose their shine, fine scratches appear near the entrances, and dull marks begin to show wherever something acidic has been spilled.
At that point, many owners assume that the floor needs replacing, or that a stronger cleaning product will restore its shine. Neither is usually the case. In the vast majority of cases, professional polishing and restoration restores the marble to its original finish, and applying the right protective treatment afterwards ensures it stays that way for considerably longer.
Understanding what has happened to the marble
The first step is to distinguish between the different types of damage, as each is treated differently. A stain is something that has been absorbed into the stone, such as oil, coffee or wine, and it usually appears darker than the surrounding surface. An etch mark is the opposite: a spot where an acid – often lemon juice, wine, vinegar or an unsuitable cleaning product – has corroded the surface, leaving it dull and lighter in colour. No cleaning product can remove an etch mark, as nothing is actually sitting on the surface; the stone itself has been altered.
Scratches are mainly caused by grit carried in on shoes and dragged across the floor, and by furniture being moved without protection. The general dullness in high-traffic areas is simply the accumulation of thousands of microscopic scratches. Deeper damage, such as uneven tiles, cracks or chips, may require further repair work before polishing.
Conditions on the Costa del Sol mean all this happens more quickly. Sand from the beach and the garden is tracked indoors every day; terraces and pool areas bring sun cream and chlorinated water onto the floor; and in holiday lettings and hotels, cleaning is often carried out in a hurry using whatever all-purpose product is to hand. Marble that would last for decades in a quiet interior can lose its finish in a single busy season.

How professional marble polishing works
Polishing marble is a mechanical process, not a product that is poured onto the floor. Following an assessment of the stone and its condition, the surface is treated with diamond abrasives of progressively finer grit. The coarser stages remove scratches and etch marks by levelling the surface; the finer stages refine it until the stone reflects light once more. Only where tiles are uneven or severely damaged is a grinding stage required at the outset.
The process is carried out using a wet method, which keeps dust under control, and the slurry produced is collected as the work progresses. Once the desired level of gloss has been achieved, the floor is cleaned thoroughly and left to dry before a protective coating is applied. The final protective treatment is an essential part of the job: freshly polished marble is clean and porous, and a penetrating sealer helps it resist stains from day one.
Diamond polishing or crystallisation?
Crystallisation is a technique that uses a chemical reaction to create a quick, high-gloss finish on calcareous stones. It can produce an impressive initial result, but it forms a modified layer on the surface that can become patchy, may make the floor more slippery and does not remove scratches or etch marks beneath the surface. Diamond polishing, by contrast, restores the stone itself. Every floor is different, and we recommend the method best suited to the marble, its intended use and the result the owner expects; however, in most cases, diamond polishing provides a more natural and longer-lasting finish.
Polished or honed: choosing the right finish
Not every marble floor needs to be mirror-bright. A high-gloss finish is ideal in living rooms, lobbies and bedrooms, but in bathrooms, near entrances that get wet in the rain and around swimming pools, a honed finish – smooth and satin-like rather than glossy – is a safer choice and hides wear and tear better. For outdoor areas and pool surrounds, we also apply anti-slip treatments that improve grip without altering the appearance of the stone.

What to expect whilst the work is being carried out
Before starting, furniture is moved and adjacent surfaces such as skirting boards, walls and woodwork are protected. Large floors are restored in sections so that the rest of the property remains usable, and in hotels and showrooms the work can be carried out outside opening hours. After polishing and applying a protective finish, the floor is usually ready for foot traffic again within a short time, although it is best to wait a little longer before putting heavy furniture or rugs back in place.
Keeping marble polished for longer
Once restored, the finish will last much longer if you adopt a few simple habits. Grit is the main cause of wear, so entrance mats and frequent dry cleaning with a microfibre mop make a huge difference. For wet cleaning, use only a neutral cleaner specifically designed for marble. Vinegar, lemon, bathroom descalers and many general-purpose cleaners will etch the surface. Spills should be wiped up immediately, glasses and bottles should not be placed directly on marble surfaces, and furniture should always have felt pads.
In high-traffic areas, a periodic maintenance polish restores the shine of the traffic lanes before wear becomes visible, which is much quicker and more economical than a full restoration. Our articles on floor protection and floor finishes Explain how this forms part of a comprehensive care plan for stone floors.
As the only certified FILA Surface Care Solutions applicator in the area, we combine professional polishing with the right protection for each type of marble. If your marble has lost its shine, has etch marks or scratches, or simply no longer looks as it should, we would be happy to assess it. Contact us on WhatsApp at +34 611 75 53 46, by email at info@limantecon.com or via limantecon.com/en/contact.
Frequently asked questions
Can all marble floors be restored?
Most can. Dullness, scratches and etch marks are removed by polishing. Cracked or chipped tiles may need to be repaired first, and very thin or badly damaged marble requires careful assessment before any work begins.
How can I tell the difference between a stain and a scratch?
A stain is usually darker than the surrounding stone, because something has been absorbed. An etch mark is dull and lighter in colour, because an acid has corroded the surface. Stains are removed using specific treatments; etch marks require polishing.
Does polished marble become slippery?
Polished marble can be slippery when wet. In bathrooms, hallways and outdoor areas, a honed finish or an anti-slip treatment is the safer option.
How often does marble need polishing?
It depends on the footfall and the cleaning routine. With proper care, a full restoration will last for years, whilst a light maintenance polish in the busiest areas keeps the floor looking its best in the meantime.
Is marble polishing a messy process?
No. It is a wet process, so dust is kept under control, the slurry is collected as the work progresses, and surrounding surfaces are protected before work begins.
