Natural stone is one of the materials that adds the most value to a property. Clad façades, masonry walls, terraces, external staircases and communal entrance halls will retain their appearance for decades if properly maintained. However, on the Costa del Sol they are exposed to harsh conditions: intense sunshine, salt spray, rain laden with ‘calima’ dust, damp in shaded areas and, in communal areas, constant foot traffic.
Over time, black stains, moss, lichens, traces of rust from furniture and a grey patina appear, which dull the original colour. It is tempting to tackle the problem with high pressure and harsh chemicals, but this is precisely where most of the damage occurs. Cleaning natural stone properly requires an understanding of the material, choosing the right method and knowing what not to do.
Not all natural stone is the same
The term ‘natural stone’ covers a wide range of very different materials. Limestone, travertine and marble are calcareous stones: they are porous and sensitive to acids, meaning that using an unsuitable product can leave permanent dull marks. Granite is hard and not very porous, but its light colours absorb grease and rust. Slate withstands wear and tear well, although it tends to flake if treated too aggressively. And sandstone, commonly used on walls and façades, is soft: excessive pressure erodes it and leaves irreparable grooves.
Therefore, before choosing a product or piece of machinery, the first step is to identify precisely what type of stone it is and what condition it is in.

The professional, step-by-step method
Diagnosis. The type of lichen, the type of dirt (organic, grease, rust, pollution, biological growth) and the condition of the joints and nearby features – such as joinery, plants or railings – are identified; these will need to be protected whilst the work is being carried out.
Test on an inconspicuous area. Before treating the entire surface, check the effect of the product and the pressure on an area that is not easily visible. This is the most reliable way to avoid any unpleasant surprises on a façade or a large terrace.
Dry cleaning and pre-washing. Loose dirt, leaves and accumulated debris are removed, and the surface is dampened so that the product acts evenly and does not penetrate the stone too deeply.
A specific product for every problem. An alkaline degreaser for general dirt and grease stains, a biocide treatment for verdigris, moss and lichens, and specific removers for rust stains. Each product requires a specific contact time; rinsing it off too soon reduces its effectiveness, and allowing it to dry on the stone can cause new stains.
Controlled cleaning. Professional equipment is used, with the pressure, nozzle and distance adjusted to suit the material. In many cases, hot water from a Kärcher professional pressure washer It allows you to clean using less pressure and achieve better results, which is particularly important on soft stone and in grout lines.
Final protection. Once dry, the stone is treated with a breathable water-repellent that repels water and dirt without sealing the pores or altering its appearance. This makes future cleaning easier and protects the material against damp and biological growth.

Mistakes to avoid
Using acids on limestone. Hydrochloric acid and other acidic descaling agents react with limestone, travertine and marble, leaving matt, rough or discoloured patches that can only be restored by polishing.
Applying too much pressure. A pressure washer used incorrectly can erode sandstone, open the pores of limestone and wash out the grout. More pressure does not mean a better clean; the key lies in using the right product and setting the equipment correctly.
Using bleach. It whitens the surface in the short term, but can leave yellowish stains and salt deposits inside the stone, which reappear as efflorescence weeks later.
Clean in full sunlight. When the surface is hot, cleaning products dry before they have a chance to work and leave streaks. In summer, it is best to clean first thing in the morning or in the late afternoon.
Seal with film-forming products. Outdoors, a varnish or surface sealer traps moisture, cracks in the sun and eventually peels off. Outdoor stone needs breathable protection.
Leaving it for too long. The more biological dirt builds up, the deeper it penetrates the pore and the more aggressive the cleaning process needs to be. Regular maintenance is always more cost-effective than a complete restoration.
Communal areas in residential blocks and hotels
Whether in entrance halls, stairwells, communal swimming pools or hotel façades, cleaning natural stone also requires careful planning: scheduling work at times that do not disturb neighbours or guests, signposting the areas where work is taking place, protecting vehicles and gardens, and ensuring the appropriate equipment is available for working at height. We coordinate each project with the estate manager or the management of the establishment to ensure that day-to-day activities are disrupted as little as possible.
How often should stone be cleaned and protected?
It depends on the orientation, proximity to the sea, shade and usage. A heavily used terrace or a north-facing façade, which is prone to damp, will require more attention than a sunny wall. As a guide, an annual inspection allows you to detect the appearance of moss, stains or loss of protection at an early stage, and to reapply the water-repellent treatment before the stone starts to absorb water. If you would like further information, please see our articles on soil treatments and preventative maintenance We explain how to incorporate these tasks into the overall maintenance of the property.
As official Kärcher distributors and the only certified applicators of FILA Surface Care Solutions in the area, we combine the right machinery with cleaning and protection products specifically tailored to each type of stone. If your façade, terrace or your housing estate’s communal areas need to be restored to their original appearance, we’d be delighted to carry out an assessment. You can contact us via WhatsApp on +34 611 75 53 46, by email at info@limantecon.com or via limantecon.com/contacto.
Frequently Asked Questions
Can a stone façade be cleaned with a pressure washer?
Yes, provided that the pressure, the nozzle and the distance are suited to the type of stone. With soft stones, such as sandstone, you should use lower pressure and, where possible, hot water, which cleans more effectively with less force.
How do you remove lichen and moss from stone?
Using a specific biocide treatment, which is left to take effect for the required time before scrubbing and rinsing. Afterwards, it is advisable to apply a breathable water-repellent treatment to reduce surface moisture and delay its reappearance.
Do you need to protect the stone after cleaning it?
It is highly recommended. A breathable water-repellent treatment repels water and dirt without altering the appearance of the stone, and makes subsequent cleaning much easier.
Can rust stains be removed from a stone terrace?
In most cases, yes, using specific rust removers. A test is carried out first, as some of these products are not compatible with all types of stone.
How often should the exterior stone be cleaned?
It depends on exposure and usage, but an annual check-up allows for timely intervention. Damp, shaded or high-traffic areas usually require more frequent checks.
